hi

@zn thank you for your info

Posted by: @derrydee123

@zn thank you for your info

Welcome

is there corner lights that could be used to save space but still do all stages. 

is there any piece of equipment that could maybe sit on outer top of tent to create bit more space. 

@zn do all lights have to be this distance or is it because of the size of light

Posted by: @derrydee123

is there corner lights that could be used to save space but still do all stages. 

Not that I know of

Posted by: @derrydee123

is there any piece of equipment that could maybe sit on outer top of tent to create bit more space.

Fan and filter 😉

Posted by: @derrydee123

@zn do all lights have to be this distance or is it because of the size of light

Most all LEDs...the recommended height above canopy is around there...cant do the same with HPS unless extraction is really good but no space for HPS in a little tent

@derrydee123

Cleaning the room with winegar will help to kill spores of mold.

120cm height is difficult but possible.

The TS600 is for vegging better go for TS1000.

The lamp needs 30cm above and 30cm underneath.

Pot 30cm + Lamp Spaces 2x30cm = 150cm thats 30 cm for the plant.

You should get or construct a net.

You should do topping and Low Stress Training.

Great advice all the way from Zombie Nation (and others inc James 😉👍)

Don’t try and reinvent the wheel DerryDee!! There are excellent working grow models to copy from directly in the grow journals ... you can’t cut some corners, including space/ height! 
Hope you have some good ideas to help you get growing! And can make the space needed.. you’ll not regret it!

Btw If you want stealth ?? have you considered a converted wardrobe or cupboard? These will afford you height required and not look ‘out of place’

I’ve previously had a landlord stood next to one i had and he didn’t notice, nor did my parents when they came to visit 😉 

Hope feel confident now to make your plan and execute 👍

good luck 

@chillbert thanks chill

 yeah im getting more of an idea. 

@james james why did you have to say ts600 is for vegging, my mind was kinda made up getting the ts600 and then you say better getting ts1000. decision decisions lol🤔🤔😂

i want to try keep the cost down on this setup just incase i cant keep doing it. but at the same time i dont want to buy something that wont do all stages. thanks

@derrydee123 it’s a common thing we see around here, new growers cutting corners to get started and then regretting that decision a few grows down the line. The TS1000 has the power to do everything you are looking for, the TS600 will be barely enough for one plant, it won’t yield what the bigger light can, and eventually you will probably wish it was more powerful and replace it. All that being said, it will work OK if that’s what you buy. It’s very common advice around here to spend the money for a good light so you won’t need/want to replace it in a year or less. More growers spend money on less than wonderful lights and then have to replace them fairly quickly. Your money, your build, and your grow so it’s your choice. James is speaking from experience.

Just as monkey explained.

Sure if you have a TS600 keep it for a vegging room but for flower it is with 20.000 LUX not good.

Means plants do stretch and search for light.

The TS1000 has about 45.000 LUX and you can dim it for the first time to the power of a TS600.

@monkeydo cheers monkey. 🍺

@james thanks james great info m8. learning all the time bcos the light wont be strong enough it will stretch. nice one👍