[Sticky] How to Make Rick Simpson Cannabis Oil
I hope you have come here out of interest, and not to research How to Make Rick Simpson Cannabis oil, because you or a family member is ill, and in need of medicine. Whatever the case is, we will help you find the information you need, to make the right medicine out of Rick Simpson Oil
Percys Grow Room will teach you how to grow your own cannabis for medical use. We can even show you how make the oil, and make the correct dosage. But you must see a certified doctor, before using medical cannabis. It may have an effect on any other medicines you're taking.
If you have any questions about making RSO, then feel free to ask for help in our cannabis growers forum
- What is RSO
- How to Make Cannabis Oil
What is Rick Simpson Cannabis Oil?
RSO is short for Rick Simpson Oil. Rick Simpson is the creator of this method of cannabis oil production. Rso, is made from the extracts of cannabis plant flowers.
The alcohol is then filtered to remove large bits. Then you slowly heat up the alcohol until it is all evaporated. This leaves just the cannabinoids behind, and that is what we call Rick Simpson Oil.
How to Make Rick Simpson Cannabis Oil for Medical Use
For the purpose of this article, we will use:
- 8oz of buds and tip leaf, with
- 4L of Isopropyl alcohol.
The amount of oil you will need will depend on your dosage, and what you're treating. For the correct dosing of cannabis oil medicines, you can ask for help in our cannabis growers forum
Step 1: Freeze your Buds
As isopropyl alcohol will not freeze until temps below −89 °C (−128 °F), it can be stored in a freezer at home. Along with your buds, put the Isopropyl alcohol into your freezer. This will make the trichomes brittle, and they will break off, and dissolve easily when you come to make your oil.
Step 2: Place Buds into Isopropyl
Once 24 hours has passed place your buds into a bucket. Break down the buds to smaller pieces to ensure the Isopropyl can get to more trichomes inside of them. The finer the better. You will filter this later so all the plant matter will be removed.
Place buds into Bucket over cover with Isopropyl Alcohol
When buds are sufficiently broken down, take 2L of the isopropyl alcohol out of the freezer. Now, pour it all over the buds, in the bucket. Leave the other half, you will use that soon.
Let this mix stand for around ten minutes. Stir constantly to dissolve as much of the cannabinoids as possible.
Step 3: Filter Out Plant Matter
Once stood, and the majority of the cannabinoids have dissolved, you have to removed the large pieces of plant matter.
Do this by fixing some cheese cloth over the top of a bowl. Then, slowly pour the mix onto the cheese cloth. The Isopropyl alcohol will run though, and be left in the bowl. All large piece of plant matter left on the cheese cloth.
Coffee filters can also be used in this part of the processes. But of course, you will have to use something smaller than a bowl to catch the solution after filtering.
To ensure you are extracting as much oil as possible, repeat step 2, and 3, one more time. Use the remaining 2 litres of isopropyl, and the remaining plant matter from your first rinse. Try to extract out as much as possible to increase your final yield.
Step 4: Heat The Isopropyl
This part can be dangerous!! Please be very careful! Do this part in A WELL VENTILATED AREA, AWAY FROM FLAMES AND SPARKS!!! It will explode if exposed to naked flames, don't be the next news story in your area!
Using a rice cooker is most common, as this heats via an element slowly. No flames or sparks. This also gives us more control over the temperature.
Add your mix to the rice cooker, but do not exceed more than 3/4 full. Set your temperatures to 210–230 °F (99–110 °C).
If you have room in the pot for more as the solution evaporates, keep topping up the rice cooker. But do not exceed 3/4 full, to avoid spillages.
If the cannabis oil reaches over 300 °F (149 °C). It can burn and will be unusable. To prevent this from happening, add a few drop of water as the solution evaporates. The water will evaporate along with the isopropyl, but it will help keep the temperature down.
Step 5: Collect Your Cannabis Oil
After all of the Alcohol has evaporated, you will be left with a brown greasy substance. This is Rick simpson oil. Use syringes to suck up the oil. Place a cap on the end of the syringes to prevent spillage.
Use syringes to collect the oil
The amount of buds and alcohol may differ for you, but the process is the same. Just be careful when it comes to ventilation whilst evaporating the alcohol!
What Can I use Rick Simpson Cannabis oil For?
Now you have made Rick Simpson Cannabis oil, there are many things you can do with it. Bioavailability can be massively increase by combining this oil with a carrier oil. To find out more about dosage and bioavailability check out the guides in the medical section!
Thanks for reading! You can find more information on anything related to growing in our cannabis grow guides. All of our guides are written by experienced growers, and members of our cannabis growers forum. If you have any questions, sign up. It is free, and we are always happy to help!
Much love Percy Growers, Happy Growing!
Personally, I have never grown weed to produce CBD , I just prefer to use iSum ranked hemp CBD products that have zero THC. Actually CBD makes miracles. It has helped keep all the aches and pains in my joints in check and I have been able to double my workout levels at the gym
Some good strains out there nowadays mate that have a good mix of both, 50/50 cbd thc. Should give one of those a go
"True guidance is like a torch in the forest, it doesn't show everything, but gives enough light for the next steps to be safe" -Swami Vivekananda
In our cannabis growers forum, we have guides to growing cannabis, cannabis grow dairies that cover growing weed in hydroponics, soil and coco. Find the help you need, by either, using the search box, or asking for help in the forum.
Our cannabis growers website also has competitions where you can win free weed seeds. As a member you will also have discount codes for cannabis seeds, and LED grow Lighting.
Our Cannabis Growers Forum is for educational purposes and we encourage our members to check their country of residence legislation before germinating a marijuana seed.
This site is here because we want to help you grow your own cannabis for personal use. Therefore, any member who is suspected of growing cannabis for commercial gains will be banned immediately.
Please read our forum rules, and enjoy the site.
Find us on all social networks! Just search for Percys Grow Room